Brodit houder/lader CAT S48c USB sig.(magnetic tip)

Artikelnummer
721154
Niet op voorraad
€ 96,95
-
+
Gegevens

Brodit houder/lader CAT S48c USB sig.(magnetic tip)

With magnetic tip. With USB-cable + cig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt.

Keep your device fully charged at all times -without the daily wear and tear of the connector! Custom made holder with a perfect, firm fit. With magnetic tip and a USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A.You have full access to the camera and all buttons when the device is in the holder.

Thanks to the magnetic tip it is even easier to place the device in the holder with a one handed grip, and to take it with you when leaving the vehicle. You simply remove the tip of the charging connector and press it into the device's charging port. The charging connects correctly at once each time, it minimizes wear and keeps the device's connector in good condition. The magnetic tip is a very strong and durable construction, withstands a minimum of 30 000 times of folding. It also protects your device's charging port from dust and dirt. Nylon braided cable with USB 2.0 high speed sync for data transmission. Not recommended to be used with devices with skin/case.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a ProClip Mounting Platform or a Pedestal Mount.

Charging specification:

Charging specifications:

- Output Connector Type: Dual USB Type-A Female.

- Output Voltage: 5V, 9V, 12V(Nominal)

- Output Current:
- USB Port 1: 4.9V ~ 5.25V 2.4A (White port, recommended for Apple)
- USB Port 2: 3.6V ~ 6V/3A 6.2-9V/2A 9.2-12V/1.5A (Green port, recommended for Android etc)
- Output Voltage Ripple: 300mV pk-pk at Max Load

- Input Voltage Range: DC 12--24V DC, Input can handle 40V Load dump translent events

- Input Current: 3.0 A DC Max

- Input Current with No device attached: 0.005A

- DC-DC Conversion Efficiency: Over 86% Typical

- Rated Power:

- USB Port 1: 12 Watts Max. White port.

- USB Port 2: 18 Watts Max. Green port.

  • Width: 84 mm
  • Height: 108 mm
  • Depth: 60 mm
  • Volume: 544 cm³
  • Weight: 179 g
Meer informatie
Meer informatie
Accessoiremerk Brodit
Barcode 7320287211542
Adviesverkoopprijs incl. BTW 95,95
Houder voor PDA
Aansluiting Sigaretten plug
Toestel houder kenmerk Toestelspecifiek
Toestel houder aflsuitbaar? nee
Productinfo Professionele houder met draaimechaniek voor uw smartphone, navigatiesysteem of tablet. Hinderlijke reflectie behoort tot het verleden door het aanpassen van de invalshoek
Veiligheid (productinfo) Deze Brodit houder biedt extra veiligheid, het voorkomt dat uw toestel bij een plotselinge manoeuvre een projectiel wordt of onder uw pedalen komt..
Productinstallatie Monteer de houder op een ProClip in uw voertuig. Een uitgebreide montagehandleiding zit in de productverpakking
Product geschikt voor info Bij het tabblad Compatibility List checkt u of smartphone, navigatiesysteem of tablet geschikt is voor deze houder
productgroep houder/ lader met sig. plug
Reviews
Schrijf uw eigen review
U plaatst een review over:Brodit houder/lader CAT S48c USB sig.(magnetic tip)
Compatibility
Instructies
Please read all of the instructions and look at the pictures before attaching the holder. 1. Fold the magnetic tip on the charging connector and remove the magnetic tip from the holder. Press the magnetic tip into place in the charging connector in the device.
2. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.
4. The holder is in place.

Scroll to top